Probing the Local Reaction Environment During High Turnover Carbon Dioxide Reduction with Ag-Based Gas Diffusion Electrodes

Discerning the influence of electrochemical reactions on the electrode microenvironment is an unavoidable topic for electrochemical reactions that involve the production of OH⁻ and the consumption of water. That is particularly true for the carbon dioxide reduction reaction (CO₂RR), which together with the competing hydrogen evolution reaction (HER) exert changes in the local OH⁻ and H₂O activity that in turn can possibly affect activity, stability, and selectivity of the CO₂RR. We determine the local OH⁻ and H₂O activity in close proximity to a CO₂-converting Ag-based gas diffusion electrode (GDE) with product analysis using gas chromatography. A Pt nanosensor is positioned in the vicinity of the working GDE using shear-force-based scanning electrochemical microscopy (SECM) approach curves, which allows monitoring changes invoked by reactions proceeding within an otherwise inaccessible porous GDE by potentiodynamic measurements at the Pt-tip nanosensor. We show that high turnover HER/CO₂RR at a GDE lead to modulations of the alkalinity of the local electrolyte, that resemble a 16 m KOH solution, variations that are in turn linked to the reaction selectivity.     

ZrCdOx/SAPO-18双功能催化剂催化CO2加氢合成低碳烯烃性能

采用并流共沉淀法制备了不同Zr/Cd原子比(n_Zr/n_Cd)的ZrCdO_x金属氧化物,并与水热法制备的不同硅铝比(n_{SiO_(2})/n_{Al_(2}O₃))的片状SAPO-18分子筛物理混合制得ZrCdO_x/SAPO-18双功能催化剂,研究了其催化CO₂加氢直接合成低碳烯烃性能。采用透射电子显微镜(TEM)、X射线衍射(XRD)、N2吸附-脱附、CO₂程序升温脱附(CO₂-TPD)、NH3程序升温脱附(NH3-TPD)和X射线光电子能谱(XPS)对催化剂进行了分析。与单一ZrO2相比,引入CdO使得ZrCdO_x比表面积下降,当n_Zr/n_Cd=8时制备的Zr8Cd1氧化物呈现出无定形小颗粒状,Zr与Cd之间较强的协同作用使得Zr Cd Ox氧化物产生了更多的氧空位,有利于CO₂的吸附活化。通过对Zr8Cd1金属氧化物与SAPO-18(硅铝比0.1)的质量比、工艺反应温度、压力和空速对催化性能影响的考察,获得了最佳反应条件。研究还发现,当SAPO-18的硅铝比从0.1降为0.01时,Br?nsted酸含量降低,产物中烯烃/烷烃物质的量之比从18.6提高至37.2,但副产物CO含量迅速增加,低碳烯烃时空收率明显下降。     

改性钛基PbO2电极的制备及其对COD的快速检测

通过制备Ti/α/β-PbO₂、Ti/Ag/β-PbO₂这两种含有不同中间层的钛基二氧化铅电极来探究电催化氧化技术快速测定葡萄糖模拟废水中有机物(COD)含量的可行性。为了评估两种电极的各项性能,首先采用扫描电镜(SEM)、X射线衍射(XRD)对电极进行形貌表征,其次进行电化学性能测试包括线性伏安曲线(LSV)、塔菲尔曲线(Tafel)、循环伏安曲线(CV)以及交流阻抗测量分析。结果表明,Ti/α/β-PbO₂电极表面晶体结构更加均匀,晶粒尺寸偏小,具有更大的电活性表面积。Ti/α/β-PbO₂电极的析氧电位为1.77 V,为·OH的产生提供良好条件。在Tafel、CV测试中,Ti/α/β-PbO₂电极的交换电流密度i₀及比电容C_p分别为0.0995 A·cm^-1、0.004098 F·cm^-1均高于Ti/Ag/β-PbO₂电极,说明Ti/α/β-PbO₂电极的耐腐蚀性以及释放电子的能力优异。最终选用Ti/α/β-PbO₂电极为工作电极。Ti/α/β-PbO₂电极检测COD的最佳条件为：氧化电位1.30 V、电解时间150 s、电解液浓度0.03 mol·L^-1 硝酸钠(NaNO₃)。电化学法与比色消解法测定COD的相关系数可达0.9909,同时具有良好的重现性与相关性,COD的检测范围为0 mg·L^-1 ~ 500 mg·L^-1。在误差允许的范围内可以替代标准的重铬酸钾法,为实现COD的在线快速检测提供参考价值。     

Binary Metal Oxide Adsorbed Graphene Modified Glassy Carbon Electrode for Detection of Riboflavin

Tungsten oxide (W) decorated titanium oxide (T) adsorbed onto a graphene (Gr) and modified the glassy carbon electrode for the electrochemical quantification of riboflavin (RF) in edible food and pharmaceuticals. For comparison, nanocomposites are formed using graphene oxide (GO), reduced graphene oxide (rGO) and pure graphite (G) sheets to study the electrochemical activities towards riboflavin. The ternary WTGr modified GCE shows the highest electrocatalytic activity due to synergetic interactions between the metal oxide and graphene. The electrochemical observations are supported by the SEM, HRTEM, XRD, UV-Vis, Zeta potential (ζ) and size data. The sensor shows a wide linear range 20 nM–2.5 μM with a detection limit 25.24 nM and sensitivity (4.249×10⁻⁸ A/nM). The fabricated sensor is validated in real samples.     

二氧化碳催化加氢及其研究进展*

综述了二氧化碳热催化加氢的现状和研究进展,为进一步开展二氧化碳催化加氢的研究提供参考     

响应面法优化Co2+掺杂TiO2制备工艺研究

利用共沉淀-水热法制备了钴掺杂二氧化钛光催化剂,以催化降解水中草甘膦效率为指标,采用响应面法对钴掺杂二氧化钛光催化剂的制备条件进行优化。结果表明,钴掺杂二氧化钛光催化剂的最佳制备工艺为:水热反应温度139.64℃、水热反应时间23.75h、煅烧温度408.17℃和煅烧时间4.04h。利用最佳制备条件下制得的钴掺杂二氧化钛光催化剂催化降解水中草甘膦,降解效率接近80%,与纯二氧化钛相比,催化降解效率有较大幅度提升。     

g-C_3N_4-TiO_2光催化电极耦合生物产电阳极还原硝酸根

以g-C_3N_4-TiO_2为光催化阴极,耦合生物阳极进行光催化还原硝酸盐研究。考察了空穴清除剂、曝气条件、生物阳极对光催化还原硝酸盐的影响,并对还原机理进行分析。结果表明在曝氮气、有生物阳极时硝酸盐去除效果最好,空穴清除剂对硝酸盐还原影响较小。反应210 min后硝酸盐去除率为72.57%,副产物亚硝酸盐浓度为0.31 mg·L~(-1),氨氮未检出。经重复实验后,负载的催化剂不脱落,催化剂活性基本不变,可重复使用。     

Amorphous MnO2 as Cathode Material for Sodium‐ion Batteries

Amorphous MnO₂ has been prepared from the reduction of KMnO₄ in ethanol media by a facile one‐step wet chemical route at room temperature. The electrochemical properties of amorphous MnO₂ as cathode material in sodium‐ion batteries (SIBs ) are studied by galvanostatic charge/discharge testing. And the structure and morphologies of amorphous MnO₂ are investigated by X‐ray diffraction (XRD ), scanning electron microscopy (SEM ), transmission electron microscopy (TEM ) and Raman spectra. The results reveal that as‐synthesized amorphous MnO₂ electrode material exhibits a spherical morphology with a diameter between 20 and 60 nm. The first specific discharge capacity of the amorphous MnO₂ electrode is 123.2 mAh •g⁻¹ and remains 136.8 mAh •g⁻¹ after 100 cycles at the current rate of 0.1 C. The specific discharge capacity of amorphous MnO₂ is maintained at 139.2, 120.4, 89, 68 and 47 mAh •g⁻¹ at the current rate of 0.1 C, 0.2 C, 0.5 C, 1 C and 2 C, respectively. The results indicate that amorphous MnO₂ has great potential as a promising cathode material for SIBs .     

Electrophoretic Deposition of Binder‐Free MnO2/Graphene Films for Lithium‐Ion Batteries

Binder‐free, nano‐sized needlelike MnO₂ ‐submillimeter‐sized reduced graphene oxide (nMnO₂‐srGO ) hybrid films with abundant porous structures were fabricated through electrophoretic deposition and subsequent thermal annealing at 500 °C for 2 h. The as‐prepared hybrid films exhibit a unique hierarchical morphology, in which nMnO₂ with a diameter of 20—50 nm and a length of 300—500 nm is randomly anchored on both sides of srGO . When evaluated as binder‐free anodes for lithium‐ion half‐cell, the nMnO₂‐srGO composites with a content of 76.9 wt% MnO₂ deliver a high capacity of approximately 1652.2 mA •h•g⁻¹ at a current density of 0.1 A•g⁻¹ after 200 cycles. The high capacity remains at 616.8 mA •h•g⁻¹ (ca. 65.1% capacity retention) at a current density as high as 4 A•g⁻¹. The excellent electrochemical performance indicates that the nMnO₂‐srGO hybrid films could be a promising anode material for lithium ion batteries (LIBs ).     

微波消解–石墨炉原子吸收光谱法测定空气中碲

建立微波消解–石墨炉原子吸收光谱法测定空气中的碲。采用微孔滤膜收集样品,以硝酸–双氧水混合体系微波消解滤膜,氯化钯为基体改进剂,在优化的仪器工作条件下测定。碲的质量浓度在0~15μg/L范围内与吸光度线性关系良好,相关系数为0.999 5,方法检出限为0.14μg/L。样品加标回收率在95.6%~104.0%之间,测定结果的相对标准偏差为1.15~1.37%(n=7)。该方法操作简单、灵敏度高,适用于空气中微量碲的测定。